Table of Contents
If you want to enhance the sound and appearance of your Ford ST, installing a performance exhaust tip is a great upgrade. It’s a relatively simple process that can be completed at home with basic tools. Follow these steps to give your vehicle a more aggressive look and a deeper sound.
Tools and Materials Needed
- Performance exhaust tip
- Socket wrench set
- Screwdriver
- Jack and jack stands or ramps
- Protective gloves
- Penetrating oil (optional)
Preparation
Park your Ford ST on a flat surface and engage the parking brake. Use a jack and jack stands or ramps to lift the rear of the vehicle safely. Wear gloves to protect your hands and consider applying penetrating oil to the existing exhaust clamp if it’s rusted or stuck.
Removing the Old Exhaust Tip
Locate the current exhaust tip. Using your socket wrench or screwdriver, loosen and remove the clamp or bolts holding the existing tip in place. Carefully slide the old tip off the exhaust pipe. If it’s stuck, gently twist or tap it with a rubber mallet.
Installing the Performance Exhaust Tip
Slide the new exhaust tip onto the end of the exhaust pipe. Ensure it fits snugly and is properly aligned. Secure it in place with the clamp or bolts you removed earlier. Tighten everything firmly but avoid over-tightening, which could damage the tip or exhaust pipe.
Final Checks and Testing
Lower your vehicle carefully and remove the jack stands or ramps. Start your engine and listen for any rattling or leaks. Check that the exhaust tip is secure and aligned. Take a short drive to experience the improved sound and appearance.
Additional Tips
- Choose a high-quality, compatible exhaust tip for the best sound and durability.
- Consider polishing or coating the tip for extra shine and corrosion resistance.
- Always follow safety precautions when working under your vehicle.