Table of Contents
Upgrading your Ford ST with a coilover suspension can significantly improve its road handling and overall driving experience. This guide walks you through the steps to install a coilover suspension system, ensuring a smoother and more responsive ride.
Tools and Materials Needed
- Socket set and ratchet
- Wrenches
- Jack and jack stands
- Spring compressors
- Torque wrench
- Coilover suspension kit for Ford ST
- Penetrating oil
- Safety gloves and glasses
Preparation
Ensure your vehicle is parked on a flat surface. Engage the parking brake and wear safety gear. Use the jack to lift the car and secure it with jack stands. Remove the wheels to access the suspension components.
Removing the Old Suspension
Apply penetrating oil to the bolts and nuts to ease removal. Use the socket set to disconnect the shocks and springs. Carefully remove the existing suspension components, noting their orientation for installation of the new coilovers.
Installing the Coilover Suspension
Position the new coilover units in place, aligning them with the mounting points. Hand-tighten the bolts initially to ensure proper fit. Use a torque wrench to tighten all bolts to the manufacturer’s specifications, typically found in the coilover instructions.
Final Checks and Reassembly
Reinstall the wheels and lower the vehicle carefully. Double-check all bolts and nuts for tightness. It’s recommended to perform a wheel alignment after installation to ensure optimal handling and tire wear.
Test Drive and Adjustments
Take your vehicle for a test drive to feel the difference. Adjust the coilover settings if your kit allows for height or damping adjustments. Fine-tuning these settings can help you achieve the desired balance between comfort and handling.
Conclusion
Installing a Ford ST coilover suspension is a rewarding upgrade that enhances your car’s handling. Follow these steps carefully, and enjoy a more responsive and enjoyable driving experience. Regular maintenance and adjustments will keep your suspension performing at its best.